Teltonika OTD500 5G Outdoor Router – Odido Version

Teltonika OTD500 5G Outdoor Router – Odido Version – Outdoor 5G FWA Router with IP55, eSIM, PoE In/Out, and RMS

The Teltonika OTD500 5G Outdoor Router—Odido version—is an outdoor 5G router designed for Odido 5G FWA solutions and professional network applications where mobile connectivity is deployed outdoors. The router supports 5G Sub-6GHz SA/NSA with speeds of up to 2.4/3.4 Gbps download and 900/550 Mbps upload, 4G LTE Cat 19 with download speeds of up to 1.6 Gbps, and 3G fallback. The OTD500 features dual SIM, eSIM, automatic switching, two Gigabit Ethernet ports, PoE-in, and PoE-out. Thanks to its IP55-rated housing, integrated mounting bracket, internal antennas, and full RMS compatibility, this router is designed for outdoor FWA installations where 5G connectivity, ease of installation, PoE cabling, and remote management come together.

Teltonika OTD500 Odido version for outdoor 5G FWA and business connectivity

The Teltonika OTD500 Odido version is positioned as an outdoor 5G router for demanding environments where the router is installed outdoors to provide 5G mobile connectivity. According to the flyer, the OTD500 is built for outdoor connectivity solutions, featuring an IP55-rated housing, an integrated mounting bracket, dual SIM and eSIM with automatic switching, Gigabit Ethernet ports, and PoE-in/PoE-out. For Odido 5G FWA, the correct configuration is essential, including the FWA-dedicated APN, a dynamic public IPv4 address, the correct Odido bands, and the deactivation of specific frequency bands in the firmware. This model is therefore well-suited for business FWA projects that require an outdoor 5G router, a wired Ethernet connection, PoE power, and remote management via RMS.

Why the Teltonika OTD500 5G Outdoor Router—Odido version?

• 5G Sub-6GHz SA/NSA with download speeds of up to 2.4/3.4 Gbps. This supports mobile broadband connectivity in outdoor Fixed Wireless Access applications.
• IP55-rated housing. The housing is designed for outdoor use in demanding environments.
• Dual SIM and eSIM with automatic switching. The router supports two physical SIM cards and eSIM profiles for mobile connectivity and switching scenarios.
• 2 Gigabit Ethernet ports. Both Ethernet ports support 10/100/1000 Mbps and can be configured as WAN ports.
• PoE-in and PoE-out. The OTD500 supports 802.3af/at PoE-in and 802.3af Alternative B PoE-out.
• RMS-compatible. The router supports the Teltonika Remote Management System for management, alerts, configuration, access, and FOTA.
• Odido 5G FWA configuration. This version is used with the Odido 5G Internet settings, including APN, band selection, and firmware band deactivation.

Applications

• Odido 5G FWA Solutions
• Outdoor 5G Internet Connections
• Fixed Wireless Access for Business Locations
• 5G connectivity at locations without a fixed connection
• Outdoor Backup Internet for Corporate Networks
• Smart city applications
• Enterprise Networks
• Industrial Outdoor Connectivity
• Remote Management of Outdoor Router Installations
• 5G Router Installations with PoE Cabling

Key Features

• Outdoor 5G Router
• 5G Sub-6GHz SA/NSA
• 4G LTE Cat 19 / Cat 18
• 3G fallback
• 3GPP Release 16
• Dual SIM with 2 x Mini SIM 2FF
• Consumer-grade eSIM with up to 7 eSIM profiles
• Automatic SIM Switch
• 2 RJ45 Ethernet ports, 10/100/1000 Mbps
• 1 x PoE input, 802.3af/at
• 1 x PoE output, 802.3af Alternative B
• PoE output up to 15 W max, depending on the power supply unit
• IP55 enclosure
• PC+ASA plastic housing
• 4 internal antennas
• Teltonika RMS, Web UI, FOTA, SSH, SMS, TR-069, MQTT, SNMP, and JSON-RPC

OTD500 5G Outdoor Technology, Interfaces, and Integration

The Teltonika OTD500 combines outdoor 5G connectivity, Gigabit Ethernet, PoE, eSIM, and RutOS in a single outdoor-mountable enclosure. The router supports 5G Sub-6GHz SA/NSA, 4G LTE Cat 19/Cat 18, 3G, dual SIM, eSIM, and framed routing to support an IP network behind a 5G UE. For wired connectivity, there are two RJ45 Ethernet ports, both with 10/100/1000 Mbps speeds and configurable as WAN. The router also supports 802.3af/at PoE-in and 802.3af Alternative B PoE-out. Within RutOS, features such as static routing, dynamic routing, firewall, network backup, load balancing, DNS over HTTPS, VPN, OPC UA, MODBUS, DNP3, DLMS/COSEM, Data to Server, and Modbus MQTT Gateway are available.

OTD500 Management, Configuration, and Odido Settings

The Teltonika OTD500 supports management via Web UI, RMS, FOTA, SSH, email, SMS, phone calls, TR-069, MQTT, SNMP, and JSON-RPC. The Web UI provides access to status, configuration, firmware updates, CLI, troubleshooting, event log, system log, kernel log, and Internet status. RMS supports firmware and configuration updates for multiple devices simultaneously, while FOTA enables firmware updates from a server. For the Odido 5G FWA version, specific settings must be applied to use the router correctly within the Odido 5G Internet environment. The configuration includes an FWA-dedicated APN, a dynamic public IPv4 address, the correct Odido bands, and the deactivation of B8, B20, B28, n8, n20, and n28 in the firmware.

Connectivity Specifications

Mobile network

• 5G Sub-6GHz SA/NSA 2.4/3.4 Gbps downlink with 4×4 MIMO
• 5G Sub-6GHz SA/NSA 900/550 Mbps uplink with 2×2 MIMO
• 4G LTE Cat 19 up to 1.6 Gbps download and Cat 18 up to 200 Mbps upload
• 3G up to 42 Mbps download / 5.76 Mbps upload
• 3GPP Release
• Release 16

SIM and eSIM

• 2 SIM slots, Mini SIM 2FF, 1.8 V / 3 V
• Consumer-type eSIM, profile download, and removal operations
• Up to 7 eSIM profiles; does not include a data plan
• SIM switch
• Auto-switch scenarios: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection failure, and SIM idle protection
• SIM Idle Protection Service
• SIM PIN Code Management

Odido 5G FWA Configuration

• Dynamic public IPv4 address
• APN: FWA Dedicated
• Frequency bands that must be deactivated in the firmware: B8, B20, B28, n8, n20, n28

Odido 5G Internet Bands

• LTE FDD: B1, B3, B7
• LTE TDD: B38
• FDD No.: n1, n3, n7
• NR TDD: n38, n78

Ethernet

• 2 x Ethernet ports, 10/100/1000 Mbps
• Both ETH ports can be configured as WAN
• IEEE 802.3, IEEE 802.3u, and 802.3az
• PoE
• 1 x PoE input
• PoE input: 802.3af/at
• 1 x PoE output
• PoE Output: 802.3af Alternative B
• PoE Maximum Power per Port: 15 W max, depending on the power supply unit

Network Backup and Failover

• VRRP and Wired Options
• Automatic failover
• Load balancing across multiple WAN connections

VPN and Tunneling

• OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc, and Tailscale
• OpenVPN with Multiple Clients and Servers Running Simultaneously
• WireGuard VPN client and server support

Industrial Protocols

• OPC UA Client and Server via TCP
• MODBUS Server and Client via TCP
• DNP3 Station and Outstation via TCP
• DLMS/COSEM Client via TCP

Cloud and IoT Platforms

• RMS, ThingWorx, Cumulocity – Cloud of Things, Azure IoT Hub, and AWS IoT Core
• Data to Server via HTTP(S), MQTT, and Azure MQTT
• Modbus MQTT Gateway

Technical Specifications

Mobile

• Mobile module: 5G Sub-6GHz SA/NSA, 4G LTE, 3G
• 5G Sub-6GHz SA/NSA 2.4/3.4 Gbps downlink with 4×4 MIMO
• 5G Sub-6GHz SA/NSA 900/550 Mbps UL with 2×2
• 4G LTE Cat 19 1.6 Gbps DL
• 4G LTE Cat 18 200 Mbps Uplink
• 3G 42 Mbps download / 5.76 Mbps upload
• 3GPP Release 16

Consumer eSIM

• Profile download and removal operations
• Up to 7 eSIM profiles; does not include a data plan
• Status information: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, RSSI, SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
• SMS Status and SMS Configuration
• USSD support
• Operator block/allow list
• Tire lock and used tire status display
• SIM Idle Protection Service
• SIM PIN Code Management

Car APN

• Bridge and Passthrough
• Framed routing: support an IP network behind a 5G UE

Ethernet

• 2 RJ45 ports, 10/100/1000 Mbps
• 2 x Ethernet ports, configurable as WAN
• IEEE 802.3, IEEE 802.3u, and 802.3az
• Auto MDI/MDIX Crossover

PoE

• 1 x PoE In
• PoE In: 802.3af/at
• 1 x PoE Out
• PoE Output: 802.3af Alternative B
• PoE Maximum Power per Port: 15 W max, depending on the power supply unit

Routing and Networking

• Static routing
• Dynamic routing: BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP
• Policy-based routing
• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake-on-LAN, and VXLAN
• VoIP passthrough support with H.323 and SIP-alg NAT helpers
• Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection
• Port forwarding, traffic rules, custom rules, and TTL target customization
• Firewall Status Page
• Port Management
• Network Topology
• DHCP relay, DHCP server configuration, static and dynamic IP allocation
• QoS / Smart Queue Management
• DDNS with support for more than 25 service providers
• DNS over HTTPS
• Network Backup
• Load Balancing
• Captive portal hotspot
• SSHFS
• VRF Support
• Traffic Management with real-time monitoring, wireless signal charts, and traffic usage history

Security

• Pre-shared keys, digital certificates, and X.509 certificates
• TACACS+
• Internal and External RADIUS User Authentication
• IP & Login Attempt Block
• Time-based login blocking
• Built-in random password generator
• Firewall via WebUI and CLI
• DMZ, NAT, NAT-T, and NAT64
• DDoS Prevention
• Port Scan Prevention
• Port- and tag-based VLAN separation
• Mobile Data Usage Control
• WEB filter with blacklist and whitelist
• Flexible access control for SSH, web interface, CLI, and Telnet
• TPM 2.0 Identification and Authentication Module
• SSL Certificate Generation with Let’s Encrypt and SCEP
• 802.1x port-based network access control server

VPN

• OpenVPN with Multiple Clients and Servers Running Simultaneously
• OpenVPN with 27 encryption methods
• IPsec with XFRM, IKEv1, and IKEv2
• GRE tunnel and GRE tunnel over IPsec support
• PPTP and L2TP client/server instances
• L2TPv3 and L2TP over IPsec support
• Stunnel
• DMVPN Phase 2, Phase 3, and Dual Hub support
• SSTP client instance support
• ZeroTier VPN client support
• WireGuard VPN client and server support
• Tinc client and server support
• Tailscale with encrypted point-to-point connections via the WireGuard protocol

Industrial Protocols and Services

• OPC UA Client and Server via TCP
• MODBUS Server and Client via TCP
• MODBUS TCP Custom Register Block Requests
• Supported data formats: 8-bit INT and UINT; 16-bit INT and UINT; 32-bit float, INT, and UINT; HEX; ASCII
• Data to Server via HTTP(S), MQTT, and Azure MQTT
• Custom LUA Scripting for Data to Server
• Modbus MQTT Gateway
• DNP3 Station and Outstation via TCP
• DLMS/COSEM Client via TCP
• Teltonika Networks Web API Beta Support

Monitoring and Management

• Web UI via HTTP/HTTPS
• Status, configuration, firmware update, CLI, and troubleshooting
• Multiple event log servers
• Firmware Update Availability Notifications
• Event log, system log, kernel log, and Internet status
• FOTA firmware update from the server
• SSH v1 and v2
• Email Status Alerts

SMS Status and SMS Configuration

• Call commands for reboot, status, mobile data on/off, output on/off, and answer/hang up with a timer
• TR-069
• MQTT Broker and MQTT Publisher
• SNMP v1, v2, and v3
• SNMP Trap
• Brute-force protection
• JSON-RPC Management API over HTTP/HTTPS
• Teltonika Remote Management System

IoT platforms

• ThingWorx monitoring of WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, and Mobile Network Type
• Cumulocity – Cloud of Things monitoring of Device Model, Revision, and Serial Number; WAN Type and IP; Mobile Cell ID, ICCID, and IMEI; Connection Type; Operator; and Signal Strength
• Azure IoT Hub with Data to Server, Direct method support, RutOS API calls, and Plug-and-Play integration with the Device Provisioning Service
• AWS IoT Core with Jobs Support

System

• CPU: MediaTek, dual-core, 880 MHz, MIPS1004Kc
• RAM: 256 MB DDR3
• Flash storage: 16 MB serial NOR flash and 256 MB serial NAND flash
• Operating system: RutOS, an OpenWrt-based Linux OS
• Supported languages: Busybox shell, Lua, C, C++, Python, and Java in the Package Manager
• SDK package with build environment
• Package Manager for additional software on the device

Firmware and Configuration

• Web UI firmware update from a file
• Check FW on the server
• Configuration profiles
• Configuration Backup
• FOTA firmware update
• RMS firmware and configuration update for multiple devices at the same time
• Keep settings during a firmware update
• Factory Reset

Nutrition

• RJ45 socket
• Input voltage range: 42.5–57.0 VDC
• Reverse polarity protection
• Voltage surge/transient protection
• Input voltage range for PoE: 42.5–57.0 VDC
• Power consumption at idle: < 2.5 W
• Maximum power consumption: < 9 W
• Max PoE: < 24 W

Physical Interfaces

• 2 RJ45 ports, 10/100/1000 Mbps
• 3 x Mobile connection type LEDs
• 3 x Mobile connection strength LEDs
• 4 x ETH status LEDs
• 2 SIM slots, Mini SIM 2FF, 1.8 V / 3 V
• RJ45 PoE Input, 42.5–57.0 VDC
• 4 internal antennas
• 4 x antenna specifications: 617–960 / 1695–2690 / 3300–4200 / 4200–5000 MHz, 50 Ω, VSWR 3.5, gain 4.9 dBi, omnidirectional
• Reset button for reboot, user default reset, and factory reset

Environment and Hardware

Housing

• PC+ASA Plastic
• Dimensions and Weight
• 110 x 49.30 x 235 mm
• 385 g
• Box: 110 x 51 x 235 mm

Assembly

• Mounting bracket
• Vertical flat-surface mounting
• Pole mounting

Environmental Conditions

• Operating temperature: -40 °C to 55 °C
• Operating humidity: 10% to 90% (non-condensing)
• Ingress Protection Rating: IP55
• Supported bands: 5G NR: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78 & 4G LTE-FDD: B1, B3, B5, B7, B8, B20, B28, B32, B71
• 4G LTE-TDD: B38, B40, B41, B42, B43
• 3G: B1, B5, B8

Odido Configuration

• This router is designed for Odido 5G FWA solutions
• For the best experience, the router must be configured using the Odido 5G Internet settings
• APN: FWA Dedicated
• IP address: dynamic public IPv4 address
• Odido LTE FDD bands: B1, B3, B7
• Odido LTE TDD band: B38
• Odido NR FDD bands: n1, n3, n7
• Odido NR TDD bands: n38, n78
• Bands to be disabled in the firmware: B8, B20, B28, n8, n20, n28
• Capestone can apply these settings using Custom Configuration

Certifications

• Certifications: CE, UKCA, RCM, CB, EAC, UCRF, WEEE, EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN 301 489-1 V2.2.3, EN 301 489-52 V1.2.1, EN 61000-4-2:2009, EN IEC 61000-4-3:2020, EN 61000-4-4:2012, EN 61000-4-5:2014 + A1:2017, EN 61000-4-6:2014, EN 61000-4-11:2020, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 301 908-25 V15.1.1_15.0.6, EN IEC 62368-1:2020 + A11:2020, EN 62311:2020, AS/NZS 62368.1:2022, IEC 62368-1:2018

In the box

• OTD500 Router
• Router Holder
• QSG, Quick Start Guide
• Packaging Box

Download

Datasheet

Flyer