Teltonika ADAS – driver safety camera accessory with HD video recording, CAN 2.0 vehicle signals and SD storage
The Teltonika ADAS solution combines an ADAS camera with Teltonika FMx series GPS trackers to support drivers in collision and incident prevention, with additional visual monitoring functionality. For event analysis, images can be captured on SD card and, depending on the tracker used, sent to a server on demand or periodically.
Why the Teltonika ADAS?
- ADAS features for driver safety: supports forward collision warning, lane departure warning and pedestrian collision warning for alerts while driving, among others.
- HD camera + SD storage: 1280×720 (HD) recording with 16 GB SD card included and support up to 128 GB.
- Video encoding H.264: video is stored/encoded in H.264.
- Contactless CAN BUS connectivity: CAN 2.0 (vehicle signals) for indicators, speed, RPM and brake, among others, depending on vehicle/database.
- Photo/video on demand or periodic: with FMC650, photo/video on demand is available and periodic image sending to the server can be set up.
- Wide operating range: power supply 9-36 V and temperature range -20 °C to +70 °C.
Tracking & data
ADAS provides visual data (photo/video) and ADAS alerts. The data sheet specifies that with FMC650 photo/video can be requested or periodic image sending to a server can be set up.
Vehicle interfaces & I/O
- CAN: CAN 2.0 (car signal – Left/Right, Speed, RPM, Brake).
- USB: USB 2.0 (for calibration).
- RS232: Indicator TX/RX (communication with FMx125, FMx225, FMx640 devices).
Connectivity & network
ADAS itself does not specify mobile radio. Possible sending of photo/video to a server is linked in the documentation to use with FMC650 (on demand or periodically).
Platform, integrations & management
Available documentation describes periodic image sending and photo/video on demand (with FMC650). Further details on APIs/protocols or a specific cloud platform are not specified in the datasheet.
Power supply & installation
- Input voltage range: 9-36 V.
- Dimensions: 80 × 120 × 50 mm.
Installation aspects such as mounting method are not specified in the datasheet passages provided.
Applications
- Driver safety use cases with warnings such as FCW, LDW and PCW.
- Visual event recording with DVR loop recording before/after incidents on SD card.
- Fleet environments where periodic photos or photo/video on demand (with FMC650) is required for monitoring and analysis.
Key features
- Suitable for: FMC650, FMB125, FMC125, FMB225, FMC225.
- Camera resolution: 1280 × 720 (HD).
- Field of view: 60° diagonally, 52° horizontally, 30° vertically.
- SD card: 16 GB included, support up to 128 GB.
- Video encoding: H.264.
- CAN: CAN 2.0 vehicle signals (Left/Right, Speed, RPM, Brake).
- USB: USB 2.0 (calibration).
- RS232 indicator TX/RX for communication with selected FMx series.
- Operating temperature: -20 °C to +70 °C.
- Certifications & approvals: including E-Mark, ECE R130, ECE R118, FCC Part 15 (full list in datasheet).
Technical specifications
Compatibility
- Supported by: FMC650, FMB125, FMC125, FMB225, FMC225.
- Note: for FMC650, photo/video is available; for connection to FMC650, cable is included in box.
Camera
- Resolution: 1280 × 720 (HD).
- Diagonal FOV: 60° | Horizontal FOV: 52° | Vertical FOV: 30°.
- Video encoding: H.264.
Storage
- SD card: 16 GB included (up to 4 hours of video footage); up to 128 GB (up to 85 hours of video footage).
Interfaces
- USB: USB 2.0 (for calibration).
- CAN: CAN 2.0 (Left/Right, Speed, RPM, Brake).
- RS232: Indicator TX/RX (communication with FMx125/FM x225/FM x640 devices).
Nutrition
- Input voltage range: 9-36 V.
Surroundings
- Operating temperature: -20 °C to +70 °C.
- Storage temperature: -40 °C to +85 °C.
- Operating humidity: max 90%.
Certifications & approvals (as specified)
- E-Mark, ECE R130, ECE R118, FCC Part 15, 56-3 EMC, KC (KN 41), MOLIT No. 2016-1053 (Annex 12), Euro NCAP Test Protocol – AEB VRU, JT/T 883, GB/T 33577, MOT Directive no. 142.
In the box
- ADAS main unit
- PCI box
- Driver Indicator
- CAN reader
- Power cable
- Main cable
- Analog cable
- RS232 cable
- 16GB SD card
- Indicator holder
