Teltonika Altos Wi-Fi 7 5G FWA Router Click & Connect – Odido Version

Teltonika Altos Wi-Fi 7 5G FWA Router – Click & Connect – Odido 5G FWA Router with Wi-Fi 7, 5G SA/NSA, and RMS

The Teltonika Altos Wi-Fi 7 5G FWA Router – Click & Connect is a 5G Fixed Wireless Access router designed for Odido 5G FWA business solutions, modern office environments, and locations where mobile broadband connectivity is used as an alternative or supplement to fixed internet access. The router supports 5G NR with download speeds of up to 4.0 Gbps and upload speeds of 900 Mbps, 4G LTE Cat 19 with download speeds of up to 1.6 Gbps and upload speeds of 200 Mbps, and 3G fallback. In addition, the Altos features Wi-Fi 7, dual-band 2×2 MIMO, one Gigabit LAN port, one 2.5 Gigabit WAN/LAN port, a Nano-SIM slot, and management via Teltonika RMS. This Click & Connect version is intended for use within Odido 5G FWA solutions with the appropriate Odido settings.

Teltonika Altos Click & Connect for Odido 5G FWA for Business

The Teltonika Altos Click & Connect is positioned as a Wi-Fi 7 router for 5G Fixed Wireless Access and was developed for FWA deployments in locations such as modern homes, small offices, enterprise environments, and smart city applications. The flyer describes the Altos as a 5G Wi-Fi 7 router for Fixed Wireless Access, featuring 5G SA/NSA, next-gen Wi-Fi 7, security features, and remote management via RMS. For Odido 5G FWA, the correct network configuration is particularly important, including the FWA-dedicated APN, a dynamic public IPv4 address, the correct Odido bands, and the deactivation of specific frequency bands in the firmware. This makes this model ideal for enterprise FWA projects that combine 5G, Wi-Fi 7, Ethernet, and centralized management.

Why Choose the Teltonika Altos Wi-Fi 7 5G FWA Router – Click & Connect?

• 5G NR with download speeds of up to 4.0 Gbps and upload speeds of 900 Mbps. This supports mobile broadband connectivity in Fixed Wireless Access applications.
• Wi-Fi 7 with dual-band 2×2 MIMO. The router provides modern wireless connectivity for local users and network devices.
• 1 x RJ45 LAN port and 1 x RJ45 WAN/LAN port. The WAN/LAN port supports 10/100/1000/2500 Mbps and can be used as either a WAN or LAN port.
• Teltonika RMS-compatible. The Altos supports remote management, fleet management, remote device access, alerts, configuration, and FOTA via the Teltonika Remote Management System.
• RutOS, based on OpenWrt. The router supports routing, firewall, VPN, monitoring, network backup, load balancing, hotspot, and various industrial services.
• Click & Connect version for Odido 5G FWA. This version is intended for use with the Odido 5G Internet settings and the corresponding FWA configuration requirements.

Applications

• Odido 5G FWA Solutions
• Business 5G Internet Connections
• Fixed Wireless Access for Offices and Business Locations
• 5G Internet at Locations Without a Landline Connection
• Backup Internet for Business Networks
• Enterprise Networks
• Smart city applications
• Small offices and modern workspaces
• Temporary or flexible internet solutions
• Remote Management of FWA Router Installations

Key features

• Wi-Fi 7 Router for 5G Fixed Wireless Access
• 5G SA/NSA Mobile Broadband Connectivity
• 5G NR with download speeds of up to 4.0 Gbps and upload speeds of 900 Mbps
• 4G LTE Cat 19 with download speeds of up to 1.6 Gbps and upload speeds of 200 Mbps
• 3G with download speeds of up to 42 Mbps and upload speeds of 5.76 Mbps
• 3GPP Release 17
• Wi-Fi 7: 802.11a/b/g/n/ac/ax/be
• Dual Band, 2×2 MIMO, Access Point Mode
• Up to 128 simultaneous Wi-Fi users
• 1 x Nano-SIM slot, 4FF
• 1 x RJ45 LAN 10/100/1000 Mbps
• 1 x RJ45 WAN/LAN 10/100/1000/2500 Mbps
• 6 internal cellular antennas and 2 internal Wi-Fi antennas
• Teltonika RMS, Web UI, FOTA, SSH, SMS, TR-069, MQTT, SNMP, and JSON-RPC
• RutOS, a Linux-based OS based on OpenWrt

Altos 5G FWA Technology, Interfaces, and Integration

The Teltonika Altos combines 5G Fixed Wireless Access, Wi-Fi 7, Ethernet, and RutOS in a single router for mobile broadband access. The router supports 5G NR, 4G LTE Cat 19, 3G, Wi-Fi 7, and a Nano-SIM slot. For wired networks, it features a 10/100/1000 Mbps LAN port and a 10/100/1000/2500 Mbps WAN/LAN port. Within RutOS, the Altos supports, among other features, static routing, dynamic routing with BGP, OSPF v2, RIP v1/v2, EIGRP, and NHRP, network backup, load balancing, hotspot, DHCP, DDNS, and traffic management. In addition, the router supports VPN services, firewall functions, WPA3, MQTT, MODBUS, OPC UA, DNP3, DLMS/COSEM, Data to Server, and the Teltonika Networks Web API.

Altos Management, Configuration, and Odido Settings

The Teltonika Altos supports management via Web UI, RMS, FOTA, SSH, SMS, Call, Email, TR-069, MQTT, SNMP, and JSON-RPC. RMS provides remote management, fleet management, remote device access, configuration, alerts, and FOTA. For the Odido 5G FWA version, specific settings must be applied to ensure the router functions correctly within the Odido 5G Internet environment. The Odido FWA configuration requires a dedicated FWA APN, a dynamic public IPv4 address, and the correct selection of frequency bands. In addition, B8, B20, B28, n8, n20, and n28 must be disabled in the firmware according to Odido specifications.

Connectivity specifications

Mobile network

• 5G NR up to 4.0 Gbps downlink / 900 Mbps uplink
• 4G LTE Cat 19 up to 1.6 Gbps download / 200 Mbps upload
• 3G up to 42 Mbps DL / 5.76 Mbps UL
• 3GPP Release
• Release 17

SIM

• 1 x SIM slot, Nano SIM 4FF
• SIM PIN code management
• Car APN

Odido 5G FWA Configuration

• Dynamic public IPv4 address
• APN: FWA Dedicated
• Frequency bands that must be deactivated in the firmware: B8, B20, B28, n8, n20, n28

Odido 5G Internet Bands

• LTE FDD: B1, B3, B7
• LTE TDD: B38
• FDD No.: n1, n3, n7
• NR TDD: n38, n78

Wi-Fi

• 802.11a/b/g/n/ac/ax/be, Wi-Fi 7
• Dual Band, 2×2 MIMO
• Access Point Mode
• Up to 128 simultaneous Wi-Fi connections

Ethernet

• 1 x 10/100/1000 Mbps LAN port
• 1 x WAN/LAN port, 10/100/1000/2500 Mbps
• Auto MDI/MDIX crossover

Network Backup and Failover

• Mobile, VRRP, and Wired Options
• Automatic failover
• Load balancing across multiple WAN connections

VPN and tunneling

• OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc, and Tailscale
• OpenVPN with Multiple Clients and Servers Running Simultaneously
• WireGuard VPN client and server support

Industrial protocols and services

• BacNET Router via USB and TCP
• OPC UA Client and Server over TCP
• MODBUS Server and Client
• DNP3 Station and Outstation via TCP and USB
• DLMS/COSEM Client via TCP
• Cloud and IoT Platforms
• RMS, ThingWorx, Cumulocity – Cloud of Things and Azure IoT Hub
• Data to Server via HTTP(S), MQTT and Azure MQTT
• Modbus MQTT Gateway

Technical specifications

Mobile

• Mobile module: 5G NR, 4G LTE Cat 19, 3G
• 5G NR up to 4.0 Gbps downlink / 900 Mbps uplink
• 4G LTE Cat 19 up to 1.6 Gbps download / 200 Mbps upload
• 3G up to 42 Mbps DL / 5.76 Mbps UL
• 3GPP Release 17
• Status information: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, RSSI, SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS status and SMS configuration

• USSD support
• Operator block/allow list
• Tire lock and used tire status display
• SIM PIN code management
• Car APN
• Bridge and Passthrough

Wi-Fi

• 802.11a/b/g/n/ac/ax/be, Wi-Fi 7
• Dual Band
• 2×2 MIMO
• Access Point Mode
• WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, WPA2-EAP, WPA3-EAP, and OWE
• CCMP and TKIP ciphers
• Up to 128 simultaneous Wi-Fi users
• Wireless QR code generator

Ethernet

• 1 x RJ45 LAN port, 10/100/1000 Mbps
• 1 x RJ45 WAN/LAN port, 10/100/1000/2500 Mbps
• IEEE 802.3, IEEE 802.3u, and 802.3az
• Auto MDI/MDIX crossover

Routing and Networking

• Static routing
• Dynamic routing: BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP
• Policy-based routing
• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, and Wake On Lan
• VoIP passthrough support with H.323 and SIP-alg NAT helpers
• Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection
• Firewall Status Page

Network topology

• DHCP relay, DHCP server configuration, static and dynamic IP allocation
• DDNS with support for more than 77 service providers
• Network backup
• Load balancing
• Captive portal hotspot
• SSHFS
• Traffic Management with real-time monitoring, wireless signal charts, and traffic usage history

Security

• Pre-shared keys, digital certificates, and X.509 certificates
• TACACS+
• Internal and External RADIUS User Authentication
• IP & Login Attempt Block
• Time-based login blocking
• Built-in random password generator
• Firewall via WebUI and CLI
• DMZ, NAT, NAT-T, and NAT64
• DDoS Prevention
• Port Scan Prevention
• Port- and tag-based VLAN separation
• Mobile quota control
• WEB filter with blacklist and whitelist
• Flexible access control for SSH, web interface, CLI, and Telnet
• Certificate Manager with Let’s Encrypt and SCEP certificate generation methods

VPN

• OpenVPN with Multiple Clients and Servers Running Simultaneously
• OpenVPN with 27 encryption methods
• IPsec with XFRM, IKEv1, and IKEv2
• GRE tunnel and GRE tunnel over IPsec support
• PPTP and L2TP client/server instances
• L2TPv3 and L2TP over IPsec support
• Stunnel
• DMVPN Phase 2, Phase 3, and Dual Hub support
• SSTP client instance support
• ZeroTier VPN client support
• WireGuard VPN client and server support
• Tinc client and server support
• Tailscale with encrypted point-to-point connections via the WireGuard protocol

Industrial protocols and services

• BacNET Router
• BacNET via USB and TCP
• OPC UA Client and Server over TCP
• MODBUS Server and Client
• MODBUS TCP Custom Register Block Requests
• Supported data formats: 8-bit INT and UINT; 16-bit INT and UINT; 32-bit float, INT, and UINT; HEX; ASCII
• Data to Server via HTTP(S), MQTT and Azure MQTT
• Custom LUA Scripting for Data to Server
• Modbus MQTT Gateway
• DNP3 Station and Outstation via TCP and USB
• DLMS/COSEM Client via TCP
• Teltonika Networks Web API Beta Support

Monitoring and Management

• Web UI via HTTP/HTTPS
• Status, configuration, firmware update, CLI, and troubleshooting
• Multiple event log servers
• Firmware Update Availability Notifications
• Event log, system log, kernel log, and Internet status
• FOTA firmware update from the server
• SSH v1 and v2
• SMS status and SMS configuration
• Call commands for reboot, status, mobile data on/off, output on/off, and Wi-Fi on/off
• Email Status Alerts
• TR-069
• MQTT Broker and MQTT Publisher
• SNMP v1, v2, and v3
• SNMP Trap and Brute-Force Protection
• JSON-RPC Management API over HTTP/HTTPS
• Teltonika Remote Management System

IoT platforms

• ThingWorx monitoring of WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, and Mobile Network Type
• Cumulocity – Cloud of Things monitoring of Device Model, Revision, and Serial Number; WAN Type and IP; Mobile Cell ID, ICCID, and IMEI; Connection Type; Operator; and Signal Strength
• Azure IoT Hub with Data to Server, Direct method support, RutOS API calls, and Plug-and-Play integration with the Device Provisioning Service
• AWS IoT Core with Jobs Support

System

• CPU: Qualcomm
• RAM: 1 GB LPDDR4
• Flash storage: 8 GB eMMC
• Operating system: RutOS, OpenWrt based Linux OS
• Supported languages: Busybox shell, Lua, C, and C++
• SDK package with build environment
• Package Manager for additional software on the device

Firmware and Configuration

• Web UI firmware update from a file
• Check FW on the server
• Configuration profiles
• Configuration Backup
• FOTA firmware update
• RMS firmware and configuration update for multiple devices at the same time
• Keep settings during a firmware update
• Factory settings reset

Nutrition

• Barrel jacket
• Input voltage: 12 VDC
• Power consumption at idle: < 8 W
• Maximum power consumption: < 24 W

Physical interfaces

• 1 x RJ45 LAN port, 10/100/1000 Mbps
• 1 x RJ45 WAN/LAN port, 10/100/1000/2500 Mbps
• 1 RJ11 telephone port
• 1 x SIM slot, Nano SIM 4FF
• 1 x Barrel socket
• 6 x Mobile Internal Antennas
• 2 internal Wi-Fi antennas
• 1 x Virtual network interface via micro USB
• Power/Wi-Fi button
• Reset button for reboot, user default reset, and factory reset
• Status LEDs: 1 x Power, 1 x Wi-Fi, 2 x Mobile connection type, 2 x LAN status

Environment and hardware

Housing

• Plastic panels
• Dimensions and weight
• Ø 100 mm x 185 mm
• 720 g
• Box: 105 x 250 x 105 mm

Montage

• Flat-surface placement

Environmental Conditions

• Operating temperature: 0 °C to 45 °C
• Operating humidity: 5% to 95% non-condensing
• Ingress Protection Rating: IP30
• Available version
• Supported tires according to the datasheet
• 5G NR: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78, n79
• LTE: B1, B3, B5, B7, B8, B20, B28, B32, B38, B40, B41, B42, B43, B71
• UMTS: B1, B3, B5, B8

Odido Configuration

• This router is designed for Odido 5G FWA solutions
• For the best experience, the router must be configured using the Odido 5G Internet settings
• APN: FWA Dedicated
• IP address: dynamic public IPv4 address
• Odido LTE FDD bands: B1, B3, B7
• Odido LTE TDD band: B38
• Odido NR FDD bands: n1, n3, n7
• Odido NR TDD bands: n38, n78
• Bands to be disabled in the firmware: B8, B20, B28, n8, n20, n28
• Capestone can apply these settings using Custom Configuration

Certifications

• Certifications: CE, UKCA, EAC, UCRF, RCM, CB, WEEE, EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN 301 489-1 V2.2.3, EN 301 489-3 V2.3.2, EN 301 489-17 V3.2.4, EN 301 489-52 V1.2.1, EN 300 328 V2.2.2, EN 301 893 V2.1.1, EN 301 908-1 V15.2.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.3.1, EN 301 908-25 V15.1.1, EN IEC 62311:2020, AS/NZS 62368.1:2022, EN IEC 62368-1:2020 + A11:2020

In the box

• Altos
• Quick Start Guide
• Power Connector

Downloads

Datasheet

Flyer