Teltonika RUTX50 SIM + eSIM – Odido Version

Teltonika RUTX50 SIM + eSIM Odido – powerful industrial 5G router for Odido 5G FWA business solutions

The Teltonika RUTX50 SIM + eSIM Odido version is a powerful industrial 5G router designed for business internet connections, professional networks, and Odido 5G FWA solutions. This router combines fast 5G connectivity with dual SIM, eSIM, five Gigabit Ethernet ports, and dual-band Wi-Fi 5. This makes the RUTX50 ideal for businesses looking to deploy a permanent or temporary 5G internet solution as a primary connection, backup connection, or network extension. This model is certified for Odido 5G FWA solutions. For the best experience, configure this router with the correct Odido settings. Would you prefer Capestone to do that for you? Then order the Custom Configuration option.

Teltonika RUTX50 Odido version for business 5G FWA and corporate networks

The Teltonika RUTX50 SIM + eSIM Odido version is designed for organizations that need fast, flexible, and professionally manageable connectivity. The router supports 5G SA and NSA, is backward compatible with 4G LTE Cat 20 and 3G, and features five Gigabit Ethernet ports for connecting business network equipment. Thanks to dual SIM, eSIM, automatic failover, and backup WAN, the router can be deployed in network configurations where availability and continuity are critical. When combined with Odido 5G FWA, this model is suitable for business locations where 5G internet is used as an alternative or supplement to fixed connectivity.

Why choose the Teltonika RUTX50 SIM + eSIM Odido version?

• 5G router for Odido 5G FWA business solutions. This model is certified for Odido 5G FWA and can be set up with the required Odido configuration.
• Dual SIM and eSIM. The router supports multiple mobile profiles and offers failover capabilities and flexible mobile connectivity.
• Five Gigabit Ethernet ports. Businesses can connect multiple wired network devices without having to immediately add additional network hardware.
• Dual-band Wi-Fi 5. The router provides wireless connectivity for local users, devices, or temporary network setups.
• Automatic failover and WAN backup. The RUTX50 can be used as a primary connection or as a backup connection alongside existing infrastructure.
• Remote management via Teltonika RMS. Management, monitoring, and configuration can be performed centrally and remotely.
• Custom Configuration via Capestone. Capestone can preconfigure the Odido settings so that the router is set up for the desired deployment.

Applications

• Odido 5G FWA Solutions
• Business 5G Internet Connections
• Temporary or permanent business locations
• Backup Internet for Corporate Networks
• Retail and Store Environments
• Smart city applications
• Industrial & automation
• Energy & utilities
• Enterprise Networks
• FWA connectivity
• Remote Management of Router Installations
• Mobile network solutions for locations without a fixed connection

Key features

• Industrial 5G Router
• Certified for Odido 5G FWA solutions
• Support for 5G SA and NSA
• Backward compatible with 4G LTE Cat 20 and 3G
• Dual SIM and eSIM functionality
• Consumer type eSIM with up to 7 eSIM profiles
• 5 Gigabit Ethernet ports
• Dual-band Wi-Fi 5
• Up to 150 simultaneous Wi-Fi users
• Automatic Failover and WAN Backup
• Teltonika Remote Management System
• RutOS, based on OpenWrt
• GNSS with GPS, GLONASS, BeiDou, Galileo and QZSS
• USB port for external devices
• Digital Input and Digital Output
• Aluminum housing
• Custom configuration available through Capestone

RUTX50 5G Router Technology, Interfaces, and Integration

The RUTX50 SIM + eSIM Odido version combines mobile 5G connectivity, wired networking, Wi-Fi, and centralized management in a single industrial router. For business applications, this means the router can be used as a primary connection, a mobile backup, or a flexible networking solution at locations where fixed infrastructure is limited. The five Gigabit Ethernet ports provide connectivity for wired devices, while dual-band Wi-Fi 5 enables local wireless access. Through RutOS, the router supports features such as VPN, firewall, network segmentation, monitoring, failover, and integration with industrial protocols. For Odido 5G FWA, proper configuration is particularly important, including APN and band settings.

RUTX50 Management, Configuration, and Odido Settings

The Teltonika RUTX50 supports management via Web UI, Teltonika RMS, FOTA, SSH, SMS, TR-069, MQTT, SNMP, and JSON-RPC. This allows for centralized or remote configuration, firmware updates, monitoring, and router management. For the Odido 5G FWA version, specific settings must be applied to ensure the router functions correctly within the Odido 5G Internet environment. The APN for the Odido 5G Internet subscription is intended for FWA. In addition, certain frequency bands must be deactivated in the firmware according to Odido’s specifications. If you prefer not to configure this yourself, Capestone can deliver the router with a custom configuration.

Connectivity specifications

Mobile network

• 5G Sub-6GHz SA/NSA 2.1 / 3.3 Gbps download, 900 / 600 Mbps upload
• 4G LTE Cat 20 up to 2.0 Gbps download / 200 Mbps upload
• 3G up to 42 DL / 5.76 UL Mbps

SIM and eSIM

• 2 SIM slots, Mini SIM 2FF, 1.8 V / 3 V

Dual SIM and eSIM

• Consumer-type eSIM with profile download and removal operations
• Up to 7 eSIM profiles

Odido 5G FWA Configuration

• Dynamic public IPv4 address
• Frequency bands that must be deactivated in the firmware: B8, B20, B28, n8, n20, n28

Odido 5G Internet Bands

• LTE FDD: B1, B3, B7
• LTE TDD: B38
• FDD No.: n1, n3, n7
• NR TDD: n38, n78

Wi-Fi

• 802.11b/g/n/ac Wave 2, Wi-Fi 5
• Dual Band, MU-MIMO
• Data speeds up to 867 Mbps
• Access Point and Station Mode
• Up to 150 simultaneous Wi-Fi connections

Ethernet

• 5 x RJ45 ports, 10/100/1000 Mbps
• 1 x 10/100/1000 Mbps WAN port
• 4 x 10/100/1000 Mbps LAN ports

Network Backup and Failover

• Wi-Fi WAN, Mobile, VRRP, and Wired options
• Auto failover, backup WAN, and switching scenarios
• Load balancing across multiple WAN connections

VPN and tunneling

• OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc, and Tailscale
• OpenVPN with Multiple Clients and Servers Running Simultaneously
• WireGuard VPN client and server support

Industrial protocols

• OPC UA Client and Server over TCP
• MODBUS Server and Client via TCP and USB
• DNP3 Station and Outstation via TCP and USB
• DLMS/COSEM Client via TCP and USB

Cloud and IoT Platforms

• RMS, ThingWorx, Cumulocity – Cloud of Things, Azure IoT Hub, and AWS IoT Core
• Data to Server via HTTP(S), MQTT and Azure MQTT
• Modbus MQTT Gateway

GNSS and Location

• GPS, GLONASS, BeiDou, Galileo and QZSS
• GNSS coordinates via WebUI, SMS, TAVL and RMS
• NMEA 0183
• NTRIP
• Configurable multiple geofence zones

Technical specifications

Mobile

• Mobile module: 5G Sub-6GHz SA/NSA, 4G LTE Cat 20, 3G
• 5G SA/NSA: 2.1 / 3.3 Gbps download speed with 4×4 MIMO
• 5G SA/NSA: 900 / 600 Mbps uplink with 2×2 MIMO
• 4G LTE Cat 20: up to 2.0 Gbps download / 200 Mbps upload
• 3G: up to 42 DL / 5.76 UL Mbps
• 3GPP Release 15/16, depending on the hardware version
• Framed routing: support an IP network behind a 5G UE

Car APN

• Tire lock and used tire status display

Bridge and Passthrough

• Odido 5G Internet Hardware Specifications
• 3GPP release: Compliant with Release 16 or later
• RATs: 4G, 5G NSA Option 3X, 5G SA Option 2
• LTE FDD bands: B1, B3, B7
• LTE TDD bands: B38
• NR FDD bands: n1, n3, n7
• NR TDD bands: n38, n78
• Bands to be disabled in the firmware: B8, B20, B28, n8, n20, n28
• DL MIMO: 4×4 MIMO on all specified bands
• UL MIMO: 2×2 MIMO on band n78
• LTE CA: 4CC
• EN-DC: 3CC LTE + 1CC NR, 2CC LTE + 2CC NR
• NR CA: 4CC
• Minimum CA / EN-DC aggregated bandwidth: 170 MHz downlink / 130 MHz uplink
• Dynamic Spectrum Sharing LTE – NR: supported
• Number of APNs to be supported: 3
• 5G network slicing: supported
• APN: FWA Dedicated
• IP address: dynamic public IPv4 address

SIM and eSIM

• Dual SIM and eSIM
• 2 x Mini SIM 2FF, 1.8 V / 3 V
• Consumer type eSIM
• Profile download and removal operations
• Up to 7 eSIM profiles
• SIM switch auto-switch scenarios: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection failure, and SIM idle protection
• SIM idle protection service
• SIM PIN code management

Wi-Fi

• 802.11b/g/n/ac Wave 2, Wi-Fi 5
• Dual Band, MU-MIMO
• Data speeds up to 867 Mbps
• 802.11r fast transition
• Access Point and Station Mode
• WPA2-Enterprise, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, and OWE
• AES-CCMP, TKIP, and Auto-cipher modes
• Client Separation
• EAP-TLS with PKCS#12 certificates
• 802.11w Protected Management Frames
• SSID stealth mode and MAC-based access control
• Wireless Mesh 802.11s
• Fast Roaming 802.11r
• BSS Transition Management 802.11v
• Radio Resource Measurement 802.11k
• Wireless MAC filter: allowlist and blocklist
• Wireless QR code generator
• TravelMate

Ethernet

• 5 x RJ45 ports, 10/100/1000 Mbps
• 1 x WAN port, 10/100/1000 Mbps
• 4 LAN ports, 10/100/1000 Mbps
• IEEE 802.3, IEEE 802.3u, and 802.3az
• Auto MDI/MDIX crossover

Routing and Networking

• Static routing
• Dynamic routing: BGP, OSPF v2, RIP v1/v2, EIGRP, and NHRP
• Policy-based routing
• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake-on-LAN, and VXLAN
• VoIP passthrough support with H.323 and SIP-alg NAT helpers
• Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection
• Port forwarding, traffic rules, custom rules, and TTL target customization
• Firewall Status Page
• Port management
• Network topology
• Captive portal hotspot
• DHCP relay, DHCP server configuration, static and dynamic IP allocation
• QoS / Smart Queue Management
• DDNS with support for more than 77 service providers
• DNS over HTTPS
• Network backup
• Load balancing
• SSHFS
• Initial VRF Support
• Traffic Management with real-time monitoring, wireless signal charts, and traffic usage history

Security

• 802.1x port-based network access control client
• Pre-shared keys, digital certificates, and X.509 certificates
• TACACS+
• Internal and External RADIUS User Authentication
• IP & Login Attempt Block
• Time-based login blocking
• Built-in random password generator
• Firewall via WebUI and CLI
• DMZ, NAT, NAT-T, and NAT64
• DDoS Prevention
• Port Scan Prevention
• Port- and tag-based VLAN separation
• Mobile quota control
• WEB filter with a block list and an allow list
• Flexible access control for SSH, web interface, CLI, and Telnet
• TPM 2.0; feature availability varies by order code
• Certificate Manager

VPN

• OpenVPN with Multiple Clients and Servers Running Simultaneously
• OpenVPN with 27 encryption methods
• IPsec with XFRM, IKEv1, and IKEv2
• GRE tunnel and GRE tunnel over IPsec support
• PPTP and L2TP client/server instances
• L2TPv3 and L2TP over IPsec support

Stunnel

• DMVPN Phase 2, Phase 3, and Dual Hub support
• SSTP client instance support
• ZeroTier VPN client support
• WireGuard VPN client and server support
• Tinc client and server support
• Tailscale with encrypted point-to-point connections via the WireGuard protocol

Industrial protocols and services

• OPC UA Client and Server over TCP
• MODBUS Server and Client via TCP and USB
• MODBUS TCP Custom Register Block Requests
• Supported data formats: 8-bit INT and UINT; 16-bit INT and UINT; 32-bit float, INT, and UINT; HEX; ASCII
• Data to Server via HTTP(S), MQTT and Azure MQTT
• Custom LUA Scripting for Data to Server
• Modbus MQTT Gateway
• DNP3 Station and Outstation via TCP and USB
• DLMS/COSEM Client via TCP and USB
• Teltonika Networks Web API Beta Support

Monitoring and Management

• Web UI via HTTP/HTTPS
• Status, configuration, firmware update, CLI, and troubleshooting
• Multiple event log servers
• Firmware Update Availability Notifications
• Event log, system log, kernel log, and Internet status
• FOTA firmware update from the server
• SSH v1 and v2
• SMS status and SMS configuration
• Call commands for reboot, status, mobile data on/off, output on/off, and Wi-Fi on/off
• TR-069
• MQTT Broker and MQTT Publisher
• SNMP v1, v2, and v3
• SNMP Trap and Brute-Force Protection
• JSON-RPC Management API over HTTP/HTTPS
• Teltonika Remote Management System

IoT platforms

• ThingWorx monitoring of WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, and Mobile Network Type
• Cumulocity – Cloud of Things monitoring of Device Model, Revision, and Serial Number; WAN Type and IP; Mobile Cell ID, ICCID, and IMEI; Connection Type; Operator; and Signal Strength
• Azure IoT Hub with Data to Server, Direct method support, RutOS API calls, and Plug-and-Play integration with the Device Provisioning Service
• AWS IoT Core with Jobs Support

System

• CPU: Quad-core ARM Cortex A7, 717 MHz
• RAM: 256 MB
• Flash storage: 256 MB
• Operating system: RutOS, OpenWrt based Linux OS
• Supported languages: Busybox shell, Lua, C, C++, Python, and Java in the Package Manager
• SDK package with build environment
• Package Manager for additional software on the device

Firmware and Configuration

• Web UI firmware update from a file
• Check FW on the server
• Configuration profiles
• Configuration Backup
• FOTA firmware update
• RMS firmware and configuration update for multiple devices at the same time
• Keep settings during a firmware update
• Factory settings reset

GNSS and Location

• GPS, GLONASS, BeiDou, Galileo and QZSS
• GNSS coordinates via WebUI, SMS, TAVL and RMS
• NMEA 0183
• NTRIP protocol
• Supported server software: TAVL and RMS
• Configurable multiple geofence zones

USB

• USB 2.0
• Samba share
• USB-to-serial
• Support for an external hard drive, flash drive, additional modem, printer, and USB-to-serial adapter
• Storage formats: FAT, FAT32, exFAT, read-only NTFS, ext2, ext3, and ext4

Input/Output

• 1 x Digital Input
• 0–6 V detected as logic low
• 8–30 V detected as a logic high
• 1 x Digital Output
• Open-collector output, max. output 30 V, 300 mA
• Events via Email, RMS and SMS
• I/O Juggler for I/O conditions

Nutrition

• 4-pin industrial DC power socket
• Input voltage range: 9–50 VDC
• Reverse polarity protection
• Surge protection >, 51 VDC, 10 us max
• Passive PoE via LAN1
• Mode B, 9–50 VDC
• Power consumption at idle: < 4 W
• Maximum power consumption: < 16.5 W

Physical interfaces

• 5 x RJ45 ports, 10/100/1000 Mbps
• 1 x Digital Input and 1 x Digital Output on 4-pin power connector
• 4 x WAN-type LEDs
• 3 x Mobile connection type LEDs
• 3 x Mobile connection strength LEDs
• 10 Ethernet port status LEDs
• 1 x Power LED
• 2 x 2.4 GHz and 5 GHz Wi-Fi LEDs
• 2 SIM slots, Mini SIM 2FF, 1.8 V / 3 V
• 4 x SMA for Mobile
• 2 x RP-SMA for Wi-Fi
• 1 x SMA for GNSS
• 1 x USB A port for external devices
• Reset button for reboot, user default reset, and factory reset
• 1 x Grounding screw

Environment and hardware

Housing

• Aluminum housing
• Dimensions and weight
• 132 x 44.2 x 95.1 mm
• 533 g
• Box: 355 x 60 x 175 mm

Montage

• DIN rail
• Wall mount
• Flat surface
• Installation options require an additional kit

Environmental Conditions

• Operating temperature: -40 °C to 75 °C
• Operating humidity: 10% to 90% non-condensing
• Ingress Protection Rating: IP30

Odido Configuration

• This router is certified for Odido 5G FWA solutions
• For the best experience, the router must be configured using the Odido 5G Internet settings
• Capestone can apply these settings using Custom Configuration

Certifications

• Certifications: CE/RED, UKCA, RCM, IMDA, CB, E-mark, SIRIM, ETSI EN 303 645, SDPPI (POSTEL), ETA-WPC, MTCTE, NOS (Portugal), EN 55032:2015 + A11:2021 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN 301 489-1 V2.2.3, EN 301 489-3 V2.1.1, EN 301 489-17 V3.2.4, EN 301 489-19 V2.2.1, EN 301 489-52 V1.2.1, EN 61000-4-2:2009, EN IEC 61000-4-3:2020, EN 61000-4-4:2012, EN 61000-4-5:2014 + A1:2017, EN 61000-4-6:2014, EN IEC 61000-4-11:2020, EN 300 328 V2.2.2, EN 300 440 V2.2.1, EN 301 893 V2.1.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 301 908-25 V15.1.1_15.0.6, EN 303 413 V1.2.1, EN IEC 62368-1:2020 + A11:2020, EN 62311:2020, AS/NZS 62368.1:2022, IEC 62368-1:2018

In the box

• RUTX50
• Quick Start Guide
• 18W PSU
• 4 x 5G Mobile SMA Antennas
• 2 x Dual-Band Wi-Fi Magnetic SMA Antennas
• GNSS adhesive SMA antenna
• Ethernet cable 1.5 m
• SIM adapter kit

Downloads

Datasheet

Flyer