Poynting CAB-049 – 10 meter HDF195 coaxial cable with N-type male to SMA male connector
The Poynting CAB-049 is a 10 meter HDF195 coaxial cable for antenna installations where an N-type male connector needs to be connected to an SMA male connector. The cable is described by Poynting as a 10 m HDF195 cable with N-type (M) to SMA (M) connectors. This model has one cable, a coax length of 10 meters / 32.8 ft and is constructed as a single cable. The CAB-049 falls within applications for commercial and industrial antennas, agricultural antennas, marine and coastal antennas, transport and mobility antennas, and urban and rural mobile antennas. As such, this cable is aimed at professional antenna setups in which cable length, coax type and connector compatibility must be pre-matched to the equipment being used.
HDF195 coaxial cable positioning for antenna installations and professional connectivity
The Poynting CAB-049 is positioned as a cable accessory for antenna setups in which an N-type male connector on the antenna or installation side is combined with an SMA male connector on the equipment side. The cable is part of the Poynting Cable Assemblies and is listed in the datasheet within the “N-Type to SMA” category. With the HDF195 coax construction, 10-meter length and single cable design, this model fits installations where a single coax connection is needed between antenna components and network equipment. Applications listed by Poynting include commercial, industrial, agricultural, maritime, transportation and mobile environments.
Why Poynting CAB-049?
- HDF195 coaxial cable – suitable for antenna installations in which this coax type is used.
- 10 meters / 32.8 ft cable length – intended for installations where a longer cable connection is required.
- N-type (M) to SMA (M) – connect to equipment and antennas with this connector combination.
- Single Cable version – constructed as a single cable assembly.
- Stock item – listed by Poynting as a stock item in the cable assemblies datasheet.
- 50 Ω nominal impedance – connects to the HDF195 electrical specifications.
Applications
- Commercial and industrial antennas
- Agricultural Antennae
- Marine and coastal antennas
- Antennas for transport and mobility
- Urban and rural mobile antennas
- Antenna installations with N-type male to SMA male connection
- Professional coaxial connections between antenna and equipment
Key features
- Cable type: HDF195
- Coaxial length: 10 m / 32.8 ft
- Number of cables: 1
- Connector side A: N-type (M)
- Connector side B: SMA (M)
- Design: Single Cable
- Stock status: Stock item
- HDF195 operating frequency: 0 ~ 6000 MHz
- VSWR HDF195: 0 ~ 6000 MHz: 1.35 Max
- Input impedance HDF195: 50 Ω nominal
- Outer jacket: Black PVC
- Minimum bending radius HDF195: 50 mm
Poynting CAB-049 technology, cable assembly and integration
The Poynting CAB-049 uses HDF195 coaxial cable and is constructed as a single cable assembly with an N-type male connector on side A and an SMA male connector on side B. The data sheet specifies for HDF195 an operating frequency of 0 to 6000 MHz, a VSWR of up to 1.35 over 0 to 6000 MHz and a nominal impedance of 50 Ω. Mechanically, HDF195 is constructed with a copper clad aluminum inner conductor of 0.94 mm, Foam PE dielectric and a Black PVC outer jacket of 4.95 mm diameter. This specified cable construction allows the CAB-049 to be used as a fixed coax connection within antenna installations requiring N-type male to SMA male.
Connectivity specifications
Connections
- Connector side A: N-type (M)
- Connector side B: SMA (M)
Cable Type
- HDF195
- Single Cable
Cable length
- 10 m
- 32.8 ft
Technical specifications
- Number of cables: 1
- Design: Single Cable
- Stock status: Stock item
Cable and connectors
- Coax type: HDF195
- Coax length: 10 m
- Coax length: 32.8 ft
- Connector Side A: N-Type (M)
- Connector Side B: SMA (M)
- Electrical specifications HDF195
- Operating Frequency: 0 ~ 6000 MHz
- VSWR: 0 ~ 6000 MHz: 1.35 Max
- Input Impedance: 50 Ω nominal
- Capacitance: 83.3 pF/m
- Velocity of Propagation: 80%
- Time Delay: 4 ns/m
- Damping HDF195
- 0.1 GHz: 0.135 dB/m
- 0.4 GHz: 0.250 dB/m
- 0.9 GHz: 0.385 dB/m
- 1.5 GHz: 0.507 dB/m
- 1.8 GHz: 0.565 dB/m
- 2.4 GHz: 0.666 dB/m
- 3.0 GHz: 0.788 dB/m
- 5.8 GHz: 1.15 dB/m
Mechanical specifications HDF195
- Inner conductor material: Copper Clad Aluminum
- Inner conductor diameter: 0.94 mm
- Dielectric material: PE Foam
- Dielectric diameter: 2.79 mm
- Outer conductor material: Tinned Copper
- Outer conductor diameter: 3.40 mm
- Jacket material: Black PVC
- Jacket diameter: 4.95 mm
- Minimum bending radius: 50 mm
Environment and hardware
Environmental specifications
- Operating temperature: -30 °C to +70 °C
- Environmental conditions: Outdoor/Indoor
- Operating relative humidity: ≤65%
- Storage humidity: ≤75%, non-condensing
- Storage temperature: -40 °C to +85 °C
Certifications
- Certifications: RoHS 2011/65/EU, ISO 9001:2015, CE, RoHS
In the box
- Poynting CAB-049 cable
- 10 m HDF195 coaxial cable
- N-type male connector
- SMA male connector
