Teltonika 30W Gigabit PoE Injector | PR325EUB
The Teltonika PR325EUB is a professional and robust 30W Gigabit Power over Ethernet (PoE) injector specifically designed for installers and network administrators looking for a reliable, efficient and secure power solution. This essential network component solves the common problem of installing devices in locations without direct access to a power outlet. By intelligently combining power and data over one standard Ethernet cable, you reduce installation time, lower costs (no additional electrician needed) and create a tidy, professional installation.
This injector is built to perform in demanding environments. It complies with the IEEE 802.3at (PoE+) standard and delivers a powerful 30 watts of power. At the same time, its Gigabit data rate ensures that your high-performance devices are never constrained, fully maintaining the integrity and speed of your network.
The Power of the Teltonika PoE Injector
- Powerful 30W PoE+ Power: Where standard PoE (802.3af) is limited to 15.4W, this injector with the 802.3at (PoE+) standard delivers up to 30W. This is critical for powering modern, demanding equipment such as 4K PTZ security cameras, advanced multi-radio access points and complex IoT sensors.
- Uncompromising Gigabit Speed: Don’t let your power solution be a bottleneck. With support for 10/100/1000 Mbps data rates, you are guaranteed maximum throughput. This is essential for streaming high-resolution video, handling large data volumes and ensuring low latency in your network.
- Intelligent Security and Reliability: The injector uses active PoE. This means that a “handshake” occurs before power is supplied. The device verifies that the connected device actually supports PoE, which prevents irreparable damage to non-PoE devices, such as a laptop. With an MTBF (Mean Time Between Failures) of 50,000 hours, it is designed for long-term, uninterrupted deployment.
- Maximum Installation Freedom: The true power of PoE is its flexibility. Mount an access point on a high ceiling, place a security camera on an exterior wall or install an IoT gateway in a remote corner of a warehouse, all without having to consider the location of power outlets.
- Ultimate Ease of Use: The PR325EUB is a pure plug-and-play solution. No software installation or configuration is required. Plug in the injector, connect your router or switch to the ‘Data In’ port and your device to the ‘PoE Out’ port. Installation is complete within minutes.
Ideal for Various Professional Scenarios
This injector is the perfect choice for a wide range of applications where reliability and performance are paramount:
- Security and Surveillance: Provide Pan-Tilt-Zoom (PTZ) cameras, infrared outdoor cameras and multi-sensor camera installations with stable power and high-speed data connection.
- Enterprise & Office Networking: Roll out high-performance WiFi 6 access points (such as the Teltonika TAP series) and VoIP phones for a clean, cable-free workplace.
- Industry & Logistics: Power industrial IoT gateways (such as the Teltonika RUT series), sensors and controllers in production halls, warehouses or other challenging environments.
- Smart City & Retail: Implement public Wi-Fi hotspots, digital signage, and smart sensors for counting visitors or monitoring the environment.
What you will receive
- Teltonika 30W Gigabit PoE Injector (PR325EUB)
Technical Specifications
For seamless integration into your existing infrastructure, find detailed technical features below:
PoE
- Standards: IEEE 802.3af / at
- Output power: 56 VDC, 0.54 A (maximum 30 W)
- PoE Pinout: Mode B, pins 4 / 5 (+), 7 / 8 (-)
- Type: Active (with automatic detection)
Interfaces
- LAN Input (Data): 1 x RJ45 port (10/100/1000 Mbps)
- PoE Output (Data + Power): 1 x RJ45 port (10/100/1000 Mbps)
- Power connector: Integrated EU (Type E/F)
Physical & Environmental
- Weight: 300 g
- MTBF: 50,000 hours
- Certifications: Safety: EN 62368-1:2014+A11:2017 (CB Scheme); EMC: EN 55032:2015/A11:2020, EN 55035:2017, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
Downloads
